Know a plastic raw material-ABS

Acrylonitrile-Butadiene-Styrene copolymer. Due to the different proportion of the three monomers, there can be different performance and melting temperature. ABS with liquidity performance, if it is mixed with other plastics or additives, can be expanded to ABS with different uses and performance, such as anti -rushing and heat -resistant levels.…
Categorieën:
ABS-legering, ABS-harsen, AS-harsen
Trefwoorden:
ABS, Acrylonitrile-Butadiene-Styrene, AES, AS, copolymer, monomers, PAS, SAN

Vraag een offerte aan

Als u vragen heeft over onze producten en service, kunt u gerust een bericht achterlaten.

Contact Form

Acrylonitrile-Butadiene-Styrene copolymer. Due to the different proportion of the three monomers, there can be different performance and melting temperature. ABS with liquidity performance, if it is mixed with other plastics or additives, can be expanded to ABS with different uses and performance, such as anti -rushing and heat -resistant levels. , Flame retardant, transparent level, enhanced level, electroplating level, etc.

1.General performance:

Plastic ABS is non -toxic and tasteless. The appearance is transparent in ivory, or transparent particles or powder. The density is 1.05 ~ 1.18g/㎝3, the shrinkage rate is 0.4%~ 0.9%, the elastic modulus value is 2GPa, the pine ratio is 0.394, the hygroscopicity <1%, the melting temperature is 217 ~ 237 ° C, the thermal decomposition temperature> 250 ℃.

2.Mechanical performance:

Plastic ABS has excellent mechanical properties, and its impact strength is excellent and can be used at extremely low temperatures; plastic ABS has excellent abrasion resistance, good size stability, and oil resistance. It can be used for medium load and low speed speeds. Bearing. ABS’s creep resistance is larger than PSF and PC, but smaller than PA and POM. ABS’s curved strength and compression strength are poor in plastic, and the mechanical properties of ABS are greatly affected by temperature.

3.Mechanical performance:

Plastic ABS has excellent mechanical properties, and its impact strength is excellent and can be used at extremely low temperatures; plastic ABS has excellent abrasion resistance, good size stability, and oil resistance. It can be used for medium load and low speed speeds. Bearing. ABS’s creep resistance is larger than PSF and PC, but smaller than PA and POM. ABS’s curved strength and compression strength are poor in plastic, and the mechanical properties of ABS are greatly affected by temperature.

Dit is een verplicht veld
Geef een geldig e-mailadres op.
Dit is een verplicht veld

Veelgestelde vragen

Gerelateerde producten

Img 20241009 112012

PA6 material YH900

Goed
The application range of ABS
ABS material
toetsenbord_pijl_omhoog
nl_NLNederlands